Electrical installation
-
Phase rotation in Alfen charging stations
Phase rotation in Alfen charging stations
-
What should I check before the installation of an Alfen charging station?
Provide a brief description of the topic here.
-
How can I check whether the meter box on site is suitable for installation of a specific charging station?
This step-by-step guide will help you with [insert topic here]
-
When to apply a ground pin when installing an Alfen charging station
In what situations is a ground pin needed?
-
Installing a charging station on an IT network or net without a "neutral".
This page explains how to install a charger on a IT network, or a net without a neutral.
-
On what grid frequencies does a charging station operate?
On what grid frequencies does a charging station operate?
-
On which power grids do Alfen's charging stations operate?
Provide a brief description of the topic here.
-
Can I connect a 3-phase charging station to a 1-phase installation?
This article provides more information on installing a 3-phase charger to a 1-phase installation.
-
What thickness should the power cable have if it is over 50 meters long?
This article informs on the cable thickness when the installation cable is over 50 meters.
-
What is the maximum length of a cable between charge station and smart meter for Active Load Balancing with P1?
The article provides information on P1 installation.
-
What is the maximum diameter of the power cables I can connect to a charging station?
This article gives information on the maximum cable diameter that can be used on Alfen chargers.
-
How to diagnose error code 212 [Missing phase in installation]
This guide will walk you through the process of diagnosing the cause of Error code 212 reported by the charger.
-
Connecting the Alfen Twin 5 to a Grid Without Neutral in Belgium
How to connect Alfen Twin 5 to a Belgian grid without neutral—two setup options, wiring steps, and ACE configuration explained.