What does Error code 206 mean?
This article explains error code 206
Applicable platform:
This error code can be found on chargers using the below platform(s):
- NG (Next Generation)
Error code 2xx | Error In Installation
Error codes starting with '2' indicate that the most likely cause for the problem is related to the Installation of the charger.
Error code:
206
Error message on display:
Temporary set to unavailable.
Contact CPO or try again later.
Possible Cause:
- Charging station is set to inoperative by the Charge Point Operator.
- The charging station is processing a firmware update.
- The charger lost the connection to the backoffice AND is set to refuse all tags when offline.
Possible solutions:
- Contact your charge point operator.
- Stop all sessions, disconnect all charge cables and allow the firmware update to install.
- The charger lost the connection to the backoffice AND is set to refuse all tags when offline.
OCPP Statusnotification:
Info field: Not Used
OCPP 1.5: Not Used
OCPP 1.6/2.0.1: Not Used
Suggestions: