What does Error code 106 mean?
This article explains error code 106
Applicable platform:
This error code can be found on chargers using the below platform(s):
- AHP (Alfen Hardware Platform)
- NG (Next Generation)
Error code 1xx | Error codes inside charge point
Error codes starting with '1' indicate that the most likely cause for the error is related to an issue inside the charger.
Error code:
106
Error message on display:
Not able to charge.
Please call for support
Possible Cause:
Power interrupted by internal RCD.
Possible solutions:
- Contact the service department of your charge point supplier.
- Contact your installation engineer.
- Internal RCD (Type A: 30mA AC) tripped.
OCPP Statusnotification:
Info field: RCD AC tripped, local engineer reset needed.
OCPP 1.5: GroundFailure
OCPP 1.6/2.0.1: GroundFailure
Suggestions: