Views:
How to change the brightness of the display on the charging station (Eve Single Pro-line and Double Pro-line)
 
Overview
You can change the brightness of the display of your Alfen charging station (Eve Single Pro-line and Double Pro-line) at any time.
It is also possible to automatically dim the display using the ‘AutoDim' function.
This function automatically dims the display after 60 seconds of inactivity on the charging station.
 
Note that for the 'AutoDim’ function to work, a working back office connection is needed for chargers on firmware 6.6.2 and earlier.

On location with the ACE Service Installer.
Use the Service Installer Setup (for NG platform), which can be downloaded from alfen.com/downloads.
Under "How do I receive login details for the ACE Service Installer configuration tool?" you can find information on requesting an account.

  1. In the ACE Service Installer, go to the 'Interface' tab.

  2. In the left menu, select the option 'Intensity'.

  3. Adjust the brightness to the desired level.
    100% is the brightest and 0% the least bright. It is also possible to activate the AutoDim function here.

  4. Save the configuration.
     

Remotely via a back office.

  1. Go to the Configuration tab in the back office.
     
  2. Change the 'LightIntensity' parameter to the desired value between 0-100%.

  3. If necessary, change the 'AutoDimLights' parameters.

    1. From firmware version 6.6.0 and higher:
      If the value 'time' is selected, screen will dim based on time (dim at night).
      If the value 'inactivity' is selected, screen will dim until a user interacts with the charging station.
      If value 'qr' is selected, the display will not dim when a QR-code is shown.
      Multiple values can be selected.
      Comma seperated list, options: "time,inactivity,qr", Default: "time,inactivity"

    2. For chargers on firmware 6.5.0 and earlier:
      The intensity of the LEDs/display after interaction is automatically dimmed based on dusk and dawn.
      After 60 seconds of no interaction with the CS the LEDs/display will dim.
      Set the set point value (True or False).

  4. Save the configuration.

 

Keywords: Display, Autodim, Intensity, Dim, Brightness