What do the led indications on the charging station mean?
The LED on the charger can have different colors, please find an explanation below.
RED (F) "Blinking"
Charging is on status "Inoperative" (can't charge) or socket lock error, protective earth, phase 0 connected incorrectly, Blocked card.
Dark Blue (C2)
Vehicle is charging.
Cyan (B2)
Charger is waiting on communication with vehicle.
Yellow
On solar charging.
On solar charging.
Yellow/Blue alternating
On partial solar charging.
Green Blinking and a beep is heard
Charging Card is read.
On partial solar charging.
Green Blinking and a beep is heard
Charging Card is read.
Green (+/- 12V CP)
Cable detection or card is accepted.
Cable detection or card is accepted.
Blue Blinking
Loadbalancing is operational and charge current is limited.
Loadbalancing is operational and charge current is limited.
White Blinking
Heartbeat (is not mentioned in the manual, Location is Ace Installer > Display > Led > Heartbeat check).
Heartbeat (is not mentioned in the manual, Location is Ace Installer > Display > Led > Heartbeat check).
If you have a charging station with a display, it will show error codes in the event of an erroneous action or malfunction.
Please see the list with error codes for a current overview of error codes and their meanings. The error code list may be updated with new firmware versions.
Please see the list with error codes for a current overview of error codes and their meanings. The error code list may be updated with new firmware versions.
The error code list can be found on our firmware release page.