How to add an additional charge card to the charging station
This article explains the ways to add a charge pass to a charger.
Adding (additional) charge passes to a charging station can be done in the following ways:
On site using the ACE Service Installer.
If a charger has been configured as 'standalone', a charge pass can be added via the ACE Service Installer:
- Open the 'Authorization' tab.
- Make sure the options 'White list enabled' and 'Local list enabled' are both checked under the 'Authorization' header.
- Click on 'Auto add' under the 'Whitelist' header.
- Next, hold the charge pass in front of the charging station.
- The charge pass will be added to the whitelist.
Locally by means of a so-called Masterkey.
If a masterkey is installed, the pass can be added by means of this masterkey.
Functionality and configuration of a masterkey are described in the manuals of the Eve Double and Eve Single.
These manuals can be found at alfen.com/downloads.
Functionality and configuration of a masterkey are described in the manuals of the Eve Double and Eve Single.
These manuals can be found at alfen.com/downloads.
Remotely via a back-office system.
If a charge station is connected (online) to the back office, the authorization of users is processed via the relevant back office system.
This works in a different way, depending on the selected back office.
Is the charging station listed in the ICU Connect back office?
Then the answer is listed under "How do I grant access to a charging station with a charge pass in ICU Connect?".
For instructions relating to other back offices, we would like to refer you to your back-office supplier.
You can fill the so-called "Local Authorization List" in OCPP with charge passes to ensure the charging station remains operable for those charge passes in offline situations.